Cisco CCNP Data Center Training in Jaipur

Module 1: In this course, you will learn to rack installations, provision server hardware, and direct operating systems or hypervisor installations

• Address key management challenges in data center server environments with Cisco UCS
• Cisco UCS B-Series and C-Series system architectures, hardware components, and field-installable options
• Connect to and manage Cisco UCS components
• Configure Cisco UCS B-Series blade servers with Cisco UCS Manager v2.2(1d)
• Connectivity requirements for the Cisco UCS platform
• Configure server profiles to allocate physical resources
• Configure maintenance tasks such as Syslog, Local Directory Access Protocol (LDAP), Role-Based Access Control (RBAC), and Simple Network Management Protocol (SNMP)
• Configure high availability at the LAN, SAN, and server NIC level
• Common deployment scenarios for small and large scale environments
• Implement service profiles and blade configuration for VMware ESXi v4.1, 5.0, 5.1 and 5.5
• Troubleshoot common LAN and SAN connectivity issues and service profile issues
• Configure high availability at the LAN, SAN, and server NIC level
• Configure Cisco Nexus 1000v v1.5.x or 2.2.x in a VMware vSphere v4.1, v5.0, 5.1 or v5.5 environment
• Configure Cisco UCS Manager and VMware vSphere Integration
• Configure, compare, and contrast Cisco VM-FEX and VM-FEX with Pass-Thru Switching

Module 9.:

• Troubleshooting tools and methodologies available from the command line interface (CLI) and in Data Center Network Manager (DCNM) used to identify and resolve issues in a Cisco Data Center network architecture
• Identify and resolve issues related to VLANs and PVLANs
• Identify and resolve issues related to Port Channels and virtual Port Channels
• Identify and resolve issues related to Cisco FabricPath
• Identify and resolve issues related to Overlay Transport Virtualization (OTV)
• Identify and resolve issues related to Fibre Channel interface operation
• Identify and resolve issues related to Fibre Channel Switching when the NX-OS Switch is used in switched mode or in N Port virtualization (NPV) mode
• Identify and resolve issues related to Fibre Channel over Ethernet (FCoE) in the Cisco data center architecture/li>
• Identify and resolve issues related to the Nexus 7000
• Identify and resolve issues specific to the Nexus 5000 family
• Identify and resolve issues specific to the Nexus 2000 FEX
• Identify and resolve issues specific to the Cisco MDS family of switches

Module 2.1: Manage the Unified Fabric in a Cisco Data Center Architecture

• Implement CMP
• Manage the Unified Fabric using DCNM SAN
• Manage the Unified Fabric using DCNM LAN
• Upgrade EPLD
• Implement SNMP in the Unified Fabric environment
• Implement xml
• Implement DeviceManager
• Implement netflow/li>
• Implement SPAN
• Implement Callhome
• Implement EEM
• Implement licensing
• Implement cfs
• Implement scheduler

Module 3.: In this Module with heavy focus on systems solutions, design, and product placement, you will walk through Cisco's UCS B-Series and UCS C-Series components, paying special attention to the individual and updated components of a complete solution and how to position a Cisco UCS design in various types of environments

• Evaluate the data center solution design and design process in regards to contemporary data center challenges, data center solution architecture, and components
• Assess the requirements and performance characteristics of the data center computing solution
• Updated hardware components available in Cisco UCS designs and how to select the proper hardware
• Employ design steps to design for the Cisco UCS solution for given data center requirements
• Propose a solution management design for a given environment
• Propose a solution management design for a given environment
• Evaluate and design Cisco UCS solution for LAN, SAN, and Virtual Access layer connectivity
• Recognize and design Cisco UCS server deployments
• Identify a Cisco UCS solution for Unified Communications and a Hadoop distributed computing application with specific UCS components to fit their application needs
• Configure Cisco UCS B-Series blade servers with Cisco UCS Manager v2.0
• Configure Cisco UCS C-Series blade servers with Cisco
• Integrated Management Controller (IMC) Implement service profiles and blade configuration for Microsoft Hyper-V 2008 and 2012, VMware ESXi v4.1, v5.0, 5.1 and v5.5
• Implement cfs
• Configure Cisco UCS v2.2(1d) Manager and vSphere integration for pass-thru switching (PTS)

The knowledge and skills that a learner must have before attending this course are as follows:

• Good understanding of networking protocols
• Recommended CCNA, CCNP and/or CCNA Data Center Certification/Training

Module 4.: In this course, you will gain the knowledge and skills needed to design scalable, reliable, and intelligent data center unified fabric and virtualization solutions based on Cisco Fabric Extenders (FEXs), Fibre Channel over Ethernet (FCoE), Cisco FabricPath, and equipment and link virtualization technologies.

• Evaluate the data center solution design and design process regarding contemporary data center challenges, Cisco Data Center Architecture solution, and components
• Technologies used in data centers, scalability implications, and their possible use in cloud environments
• Design data center connections and topologies in the core layer
• Design data center storage designs, solutions, and limitations of various storage technologies
• Design secure data centers that are protected from application-based threats, network security threats, and physical security threats
• Design data center infrastructure that is required to implement network-based application services
• Design data center management to facilitate monitoring, managing, and provisioning of data center equipment and applications

Module 5.1: Cisco UCS B-Series Troubleshooting

• Troubleshooting Cisco UCS B-Series Architecture and Initialization
• Troubleshooting Cisco UCS B-Series Configuration
• Troubleshooting Cisco UCS B-Series Operation
• Troubleshooting Cisco UCS B-Series LAN and SAN Connectivity
• Troubleshooting Cisco UCS B-Series Hardware

Module 5.2:Cisco UCS C-Series Troubleshooting

• Cisco UCS C-Series Architecture and Configuration
• Troubleshooting Cisco UCS C-Series Hardware and Firmware
• Troubleshooting Cisco UCS C-Series LAN and SAN Connectivity
• Troubleshooting Locally Attached Storage
• Troubleshooting Operating System-Related Issues

Module 5.3:Cisco UCS C-Series Integration Troubleshooting

• Integrating Cisco UCS C-Series and Cisco UCS Manager
• Troubleshooting Cisco UCS C-Series and Cisco UCS Manager Integration

Upon completing this course, the learner will be able to meet these overall objectives:

Module 1:Implementing Cisco Data Center Unified Fabric (DCUFI)

• Identify the Cisco Nexus product family
• Install the Cisco Nexus products in a Cisco Data Center environment
• Perform planning and implementation of virtual device contexts
• Evaluate the security features available on the Cisco Nexus 7000 Switch
• Evaluate service-level and network-level high availability of the Cisco Nexus switches
• Configure Fibre Channel over Ethernet on the Cisco Nexus switch

Module 2:Cisco Data Center Unified Computing Design (DCUCD)

• Evaluate the Cisco Unified Computing System solution design process
• Describe the hardware components of the Cisco Unified Computing System
• Describe the basic server deployment model of the Cisco Unified Computing System
• Describe the advanced Cisco UCS server deployment model
• Design a migration plan to a Cisco Unified Computing System solution

Module 3:Designing Cisco Data Center Unified Fabric (DCUFD)

• Describe the data center network architecture design
• Describe the Cisco data center network equipment
• Explain virtualization principles that are used in data center networks
• Explain server virtualization concepts
• Design data center services and security
• List data center standards, trends, and sizing guidelines